If you are planning to give a new look to your home or office building, Brick Wall Cutting can be the solution for you. To install a door, window, or access panel into a brick wall, you will have to cut a new opening in the wall. You can cut the bricks using several methods such as with an angle grinder. The best way to get the finest cut brick wall is to hire a professional to do the job for you. They will use the best tools to mark up, measure, and knock the bricks safely.
The first step is to
sketch or design a plan of where you want the opening to be in the wall. Also,
the size of the opening should be determined beforehand. If it is meant for a
door or a window and the types of doors and windows must be known. The
measurements of the doors and windows should be known too.
The tools and materials that are used for brick wall cutting:
- Hammer drill
- Leather gloves
- Brick bolster
- Earmuffs
- Diamond blade
- Marker
- Face mask
- Large angle grinder
- Spirit level
- Mash hammer
- Safety glasses
Steps involved in a
brick wall cutting
- Before starting the process of Internal Wall Removal, installing a lintel is necessary. You have to install a steel lintel above where you want the hole. This is to make sure that the wall remains supported and won’t fall apart under its’ weight. Once the lintel is installed, you can mark out the vertical cutting lines with the help of a spirit level. The installation process will be properly carried on by a skilled professional.
- Cut an opening in a wall: Using an angle grinder, the professional will cut straight lines into the wall. In this process, a lot of brick dust will come off, so prefer wearing a dust mask, earmuffs, and safety glasses. The tool does the work, it doesn’t need to be pushed too hard.
- The mortar will start loosening up from the bricks: The expert will use a hammer and masonry bit to drill holes in the mortar, this will be done between the bricks that you want to remove. Mortar is softer than bricks and hence facilitates quick cutting. This makes the bricks easier to knock off without applying excessive force. Internal wall removal is performed with utmost care.
- Knock the bricks out of the wall: Using a hammer, the
expert will remove the bricks from the opening. The edges of the bricks
will be hit carefully, this is done to preserve the clean edges of the
bricks. The top bricks are removed carefully without removing the lintel.
What is concrete wall
sawing?
Concrete Wall Sawing is employed to create openings for doors and windows or to separate an area of wall for demolition. This process is used to cut vertical surfaces such as surfaces where flat saws cannot be used and brick or concrete walls for cutting openings in vertical surfaces. A track is attached to the wall, along with this, the concrete saw will run along the track to create a linear cut. It can be used to reinforce floors, concrete walls and also utilized in demolition cutting through structural concrete, cinder block, stone, and asphalt. It provides for vaults, chests, doors, foundations, windows, large pipes, removal of part of all of the existing walls, etc.
Many of the
construction companies use wall sawing for cutting openings in
full wall removal, concrete foundations, making flush cuts, and cutting through
columns and beams. This method is used to remove concrete because it gives high
strength in compression and is used for covering long spans. The professionals
will use a circular blade to cut through walls. This can be cut up to 24 inches
thick and making it ideal for a construction demolition job. These projects
require proper planning and careful execution, this is implemented by
experienced professionals to avoid unwanted and potentially dangerous
complications.
Given below are the
benefits of wall cutting
- Maintains structural integrity by protecting it.
- Less debris, noise, and dust.
- Precise cutting
- Takes less downtime
- Limited access cutting
Various methods of
Brick wall cutting
- In this method a circular saw will be fitted with a masonry blade that will cut both mortar and the brick, producing clean lines. This method creates a lot of debris. Hence the professionals are generally equipped with face masks, gloves, etc.
- An angle grinder is used with a masonry wheel, this will cut through the mortar and the brick. Allowing for tighter angles on the wall. Debris accumulation is the same in this method as well.
- A reciprocating saw is used with a masonry cutting blade that can cut straight lines. For this process, the saw is held firmly.
- Reciprocating saws will allow for plunge cuts in the material such as drywall. They don’t work efficiently on masonry walls.
- A high-quality multi-tool will be equipped with a masonry attachment, this allows for plunge cuts that can be a good way to get the cut started.
- Cutting out the bricks manually by using masonry can offer finer control of the process.
These are the steps
involved in brick wall cutting. If you are planning to renovate your home and
it requires wall cutting to be done on the walls, make sure to hire an experienced
professional for the task.